Welcome to the official website of Tyson Test Equipment Co., Ltd.

  • Official micro-blog
  • Official WeChat
  • Consultation hotline:0755-23593495
/ EN

Position : Home > Torque sensor

TS-NJD205B Dynamic torque sensor

Product Profile:

Product Introduction:

· Resistance strain principle, power supply and signal output through the brush. 
· Measurement of medium and low range torque. The positive and negative torque values can be measured.
· Both ends of the shaft key connection, easy to install and use. 
· Type A maximum speed does not exceed 500 rpm, maintenance cycle: about 15 million rpm
· Type B maximum speed does not exceed 300 rpm, maintenance cycle: about 10 million rpm

Product Details
File download
Specifications
Range of measurements
TS-NJD205B 0~200,300,500,1000 Nm
Output sensitivity 1.0~2.0 mV/V
Straightness L ±0.1; ±0.3; ±0.5 %F.S
Lag H     ±0.1; ±0.3; ±0.5 %F.S
Repeated R ±0.1; ±0.3; ±0.5 %F.S
Operating temperature -10~+60
Compensated temp range indoor temperature~+60
Temp effect on zero ±0.1 %F.S/10 ℃
Recommanded excitation 12 VDC
Insulation 2000 MΩ/100VDC
Input impedance 700±10/350±10 Ω
Output impedance 700±5/350±5 Ω
Zero balence 0~±1 %F.S
Safety overload rate 120 %F.S
Ex-factory standard line  length 1.8 m
Electrical connection
  Connection Mode
Plug seat number
Wire Color
  Enter (power supply)positive end
1
Red
  Output signal positive end
2
Gree
  Output signal negative end
3
White
  Enter (power supply)negative end
4
Black
  If the color of the plug seat number, wire color changes, please take the sensor verification certificate.