Welcome to the official website of Tyson Test Equipment Co., Ltd.

  • Official micro-blog
  • Official WeChat
  • Consultation hotline:0755-23593495
/ EN

Position : Home > Torque sensor

TS-NJD205A Dynamic torque sensor

Product Profile:

Product Introduction:

· Resistance strain principle, power supply and signal output through the brush.

· Measurement of medium and low range torque. The positive and negative torque values can be measured. 
· Both ends of the shaft key connection, easy to install and use.
· Type A maximum speed does not exceed 500 rpm, maintenance cycle: about 15 million rpm
· Type B maximum speed does not exceed 300 rpm, maintenance cycle: about 10 million rpm

Product Details
File download
Range of measurements
TS-NJD205A 0~0.5,1,2,5,10,20,30,50,100 Nm
Output sensitivity 1.0~2.0 mV/V
Straightness L ±0.1; ±0.3; ±0.5 %F.S
Lag H     ±0.1; ±0.3; ±0.5 %F.S
Repeated R ±0.1; ±0.3; ±0.5 %F.S
Operating temperature -10~+60
Compensated temp range indoor temperature~+60
Temp effect  on zero ±0.1 %F.S/10 ℃
Recommanded excitation 12 VDC
Insulation 2000 MΩ/100VDC
Input  impedance 700±10/350±10 Ω
Output impedance 700±5/350±5 Ω
Zero balence 0~±1 %F.S
Safety overload rate 120 %F.S
Ex-factory standard line  length 1.8 m
Electrical connection
  Connection Mode
Plug seat number
Wire Color
  Enter (power supply)positive end
  Output signal positive end
  Output signal negative end
  Output signal negative end
If the color of the plug seat number, wire color changes, please take the sensor verification certificate